Professional
window tint
in Scarborough.

Ontario's Highway Traffic Act requires front side windows (driver and passenger) to allow at least 70% visible light transmission (VLT). This means the darkest legal film for front windows is roughly 70% or a clear ceramic. Rear side windows and the back windshield can be any darkness. The windshield can only have a tint visor strip on the top 127mm (5 inches) — no full windshield tint is allowed. Violations result in fines and mandatory removal. At Beyond Detail, we only install tint configurations that pass Ontario regulations, ensuring every vehicle leaves inspection-ready. For maximum heat rejection on front windows without breaking the law, we recommend clear ceramic film like Llumar IRX at 70% VLT, which blocks infrared heat without darkening the glass.

Carbon tint and ceramic tint are fundamentally different technologies. Carbon tint (like Llumar CTX) uses carbon particles for privacy and basic UV protection, but offers limited heat rejection. Ceramic tint (like Llumar IRX) uses nano-ceramic particles to reject up to 97% of infrared heat and 99% of UV rays, delivering superior thermal comfort and interior protection. Ceramic films also don't interfere with phone signals, GPS, or Bluetooth, while metallic films can. For Scarborough summers, ceramic tint keeps your cabin significantly cooler, reduces air conditioning workload, and improves fuel efficiency. While ceramic costs more upfront, the energy savings and superior performance make it worth the investment for daily drivers. The films we use — Llumar, Huper Optik, and 3M — all carry lifetime warranties, so ceramic film will outlast the vehicle itself.

Professional window tint installation typically takes 2-4 hours depending on your vehicle type. Sedans usually take 2-3 hours, while larger SUVs or trucks may take 3-4 hours. We use computer-cut Llumar films that are pre-cut to the exact dimensions of your vehicle's windows, which eliminates hand-cutting and speeds up installation. Same-day service is available in Scarborough. After installation, the film needs 24-48 hours to fully cure. During this time, you may notice small water pockets or hazy appearance — this is normal and clears as the adhesive dries. We ask that you keep your windows up for 3-5 days post-installation to allow proper bonding.

We carry three professional-grade film brands, each with distinct strengths. Llumar is our most popular choice, covering entry-level dyed films (ATC series) to premium ceramic (IRX). Llumar IRX rejects up to 97% of infrared heat with a manufacturer-backed lifetime warranty. For most clients, Llumar offers the best balance of performance, warranty, and cost. Huper Optik is a ceramic-only brand using nano-ceramic particles throughout their lineup, meaning superior heat rejection at all price points. If heat rejection is your priority and you don't want interference with GPS or Bluetooth, Huper Optik is the specialist choice. 3M Crystalline is a strong ceramic film offering high heat rejection in a nearly clear film, ideal for drivers wanting thermal comfort without visible tint. 3M Color Stable is their good mid-range carbon option that resists fading. We can show you samples on your glass during a free consultation to help you decide.

No, professional ceramic tint does not compromise night visibility when installed correctly. The film is applied to the interior side of the glass, allowing you to see out clearly from inside your vehicle regardless of darkness. In fact, ceramic tint reduces glare from oncoming headlights, improving comfort during night driving. The key is choosing an appropriate VLT for your needs. Front windows at 70% VLT legal limit maintain excellent visibility both day and night. Darker tints (35-50% VLT) on rear windows also maintain good interior visibility while providing maximum privacy. Unlike metallic films, ceramic tint won't create reflections or hazing that could affect visibility. We always ensure your installation meets Ontario regulations and maintains safe sight lines.

Window tinting alone will not void your vehicle's manufacturer warranty. Professional tint installation doesn't modify mechanical or electrical systems. However, if tint is installed incorrectly and causes electrical problems (like interfering with window motors or sensors), that specific issue might not be covered. We use proper installation techniques that don't damage any vehicle systems. All our Llumar films come with manufacturer-backed lifetime warranties that are separate from your vehicle warranty. If your vehicle has existing defects and tinting somehow exacerbates them, a dealer might argue causation — but this is extremely rare with professional installation. We recommend informing your dealer that you have professional ceramic tint installed, but it should have zero impact on your coverage.

Window tinting in Scarborough typically ranges from $250-$600+ depending on your vehicle type and film selection. At Beyond Detail, premium Llumar tinting starts at $250 for sedans, with lifetime warranty included. Pricing varies based on vehicle size (sedan vs. SUV vs. truck) and film type (ATC dyed, CTX carbon, or IRX ceramic). Dyed films are most affordable but offer basic privacy and UV protection. Carbon films provide better heat rejection and durability. Ceramic films command the highest price but deliver maximum performance with 97% heat rejection and don't interfere with electronics. We offer multiple packages to fit different budgets and performance needs. All our installations include lifetime manufacturer warranty and satisfaction guarantee.

Wait 3-5 days before rolling down your windows after tint installation. The adhesive needs time to fully bond to the glass, and water exposure during the curing process can prevent proper adhesion and cause premature peeling or bubbling. Avoid washing your vehicle for the same 3-5 day period. After the curing period is complete, you can roll your windows down and wash normally. When washing, use soft microfiber cloths and ammonia-free cleaners to protect the tint film. Ammonia-based glass cleaners can degrade tint film over time. We provide detailed aftercare instructions with every installation, and our technical team is always available if you have questions during the curing period.